Bearing introduction

two rows of symmetrically arranged spherical rollers, the outer ring has two raceways,Form an angle with the vertical axis of the bearing. Mainly bear radial load, the same as. It can also withstand axial loads in any direction. Suitable for heavy loads and whole building loads work in the state. It is one of the core bearings of heavy equipment.

Cage structure

CC Two window-type stamped steel cages, completely free of internal ribs and with a guide ring guided by an inner ring.

ECC Two window-type stamped steel cages with no internal ribs at all.

CA fork-shaped machined brass cage with ribs on both sides of the inner ring, the cage is guided by the inner ring.

MB machined brass cage with ribs on both sides of the inner ring and a guiding rib in the middle.

JATEC provides customized services for sealed spherical roller bearings.

Internal hole mode: two internal control modes of cylindrical hole and conical hole

Size range: inner hole 50mm ~ 400mm

Series No:21010~21322 / 22210~22380 / 23022~23980 / 24122~24180